ABB KSE325TPN Weatherproof Isolator 25A 3-Pole Grey IP66
The ABB KSE325TPN is a 25A 3-pole weatherproof enclosed isolator in a grey enclosure rated IP66 for outdoor and exposed UAE installations. Ideal for pool equipment, HVAC external units, irrigation systems, and any outdoor electrical equipment requiring safe, weatherproof isolation in the UAE climate.
Key Features
- 25A 3-pole isolator in IP66-rated weatherproof grey enclosure
- Suitable for outdoor and exposed installations in UAE conditions
- Padlockable handle for safety lockout
- Surface-mounting for walls, plant rooms, and outdoor structures
- Genuine ABB KSE series quality
Technical Specifications
| Specification |
Details |
| Brand |
ABB |
| Model |
KSE325TPN |
| Article Number |
2CMA142412R1000 |
| Rated Current |
25A |
| Poles |
3 |
| IP Rating |
IP66 |
| Enclosure |
Grey Weatherproof |
| Voltage |
415V AC |
Applications
- Outdoor HVAC and chiller unit isolation
- Pool and water feature equipment isolation
- Outdoor lighting and irrigation system isolation
- Industrial outdoor equipment safety isolation
FAQ
-
Is this an MCB or an isolator?
It's an isolator (switch-disconnector), not an MCB. It has no overload or short-circuit protection — it only provides a manual on/off disconnect, and should be paired with separate MCBs or RCCBs for circuit protection.
-
What does 3-pole mean for this isolator?
3-pole means it switches all three phases on a three-phase supply.
-
Where should this isolator be installed?
Typically as the main incoming switch or a local isolation point ahead of the MCBs/RCCBs in a distribution board, so the whole board (or a section of it) can be isolated for maintenance without needing to trip individual breakers.
-
Can I install this myself?
No. This is trade-only distribution board equipment and must be installed and connected by a licensed electrician in accordance with local wiring regulations.
-
Can this isolator be used to switch a live circuit under load?
Isolators rated for on-load switching can do this within their utilisation category, but check the specific AC rating in the Technical Specifications table — an isolator is not a protective device and should not substitute for a circuit breaker.
