ABB KSE3100TPN Weatherproof Enclosed Isolator 100A 3-Pole IP66
The ABB KSE3100TPN is a 100A 3-pole weatherproof switch disconnector in a robust grey IP66 enclosure. Designed for heavy-duty outdoor isolation in UAE industrial, commercial, and utility applications, it handles larger three-phase circuits on rooftops, plant rooms, and exposed outdoor installations.
Key Features
- 100A 3-pole isolator in robust IP66 grey weatherproof enclosure
- Heavy-duty outdoor isolation for large three-phase circuits
- Padlockable handle for safety lockout compliance
- Surface-mounting for outdoor and plant room walls
- Genuine ABB KSE high-current weatherproof isolator quality
Technical Specifications
| Specification |
Details |
| Brand |
ABB |
| Model |
KSE3100TPN |
| Article Number |
2CMA144570R1000 |
| Rated Current |
100A |
| Poles |
3 |
| IP Rating |
IP66 |
| Enclosure |
Grey Weatherproof |
| Voltage |
415V AC |
Applications
- Large outdoor HVAC and industrial plant isolation
- Rooftop equipment and generator isolation
- Industrial outdoor three-phase safety isolation
- Commercial building services outdoor isolation switches
FAQ
-
Is this an MCB or an isolator?
It's an isolator (switch-disconnector), not an MCB. It has no overload or short-circuit protection — it only provides a manual on/off disconnect, and should be paired with separate MCBs or RCCBs for circuit protection.
-
What does 3-pole mean for this isolator?
3-pole means it switches all three phases on a three-phase supply.
-
Where should this isolator be installed?
Typically as the main incoming switch or a local isolation point ahead of the MCBs/RCCBs in a distribution board, so the whole board (or a section of it) can be isolated for maintenance without needing to trip individual breakers.
-
Can I install this myself?
No. This is trade-only distribution board equipment and must be installed and connected by a licensed electrician in accordance with local wiring regulations.
-
Can this isolator be used to switch a live circuit under load?
Isolators rated for on-load switching can do this within their utilisation category, but check the specific AC rating in the Technical Specifications table — an isolator is not a protective device and should not substitute for a circuit breaker.
